Ethylene Propylene / EPM, EPDM

 

Ethylene propylene rubber is an elastomer prepared from ethylene and propylene monomers (ethylene propylene copolymer) and at times with an amount of a third monomer (ethylene propylene terpolymers). Ethylene propylene rubber has a temperature range of -50C to +120/150C (-60F to +250/300F)

, depending on the curing system.
It has a great acceptance in the sealing world because of its excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight. These compounds also withstand the affect of brake fluids and Skidoos" and other phosphate ester-based hydraulic fluids. EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments.

 

Special EPDM compounds have good resistance to steam.

  • EPDM Sulphur cured: inexpensive material for normal use, maximum temperature of +120C (+250F).

  • EPDM Peroxide cured: for hot water vapor, alcohols, ketones, engine coolants, organic and inorganic acids and bases. Not resistant to mineral oils. For maximum temperatures of +150C (+300F).

 
 
 
 
 
 
 
Loading

Search The Site

  SITE MAP CAREER INDUSTRIES DOWNLOAD CONTACT ABOUT  

1 Hossen Basha EL Meamary ST, KASR EL NILE CAIRO-Egypt

:

HEAD OFFICE

6th Of October City - 6th Industrial zone - Section 72

:

FACTORY

 

Fax: (202) 25788393 - 35400455

Tel.: (202) 25788393 - 35400382

FOLLOW US

E.mail : info@tistam.com

The Site is Designed by